Harney-Well
1 / 5
| Description | Qty. | Description | Qty. |
|---|---|---|---|
| Sharp Hook | 1 | Stardrive Screwdriver T8 (short), Ø2.4mm | 1 |
| LCP Drill Sleeve, Ø1.5mm | 2 | Stardrive Screwdriver T8 (long), Ø2.4mm | 1 |
| Drill Sleeve, Ø2.0mm | 1 | Depth Gauge | 1 |
| Drill Bit, Ø1.5mm | 2 | LCP Drill Sleeve, Ø1.8mm | 2 |
| Countersink | 1 | Universal Drill Guide | 1 |
| Stardrive screwdriver T6 (short), Ø2.0mm | 1 | Quick Coupling Straight Handle | 1 |
| Stardrive screwdriver T6 (long), Ø2.0mm | 1 | LCP Plate Bender | 2 |
| Flat Pliers | 2 | Special Instrument Tray | 1 |
| Cutting Pliers | 1 | Implant Tray | 1 |
| Torque Limiter,0.4 N·m | 1 | Instrument Tray (CanMLP) | 1 |
| Torque Limiter, 0.6 N·m | 1 | Drill Sleeve, Ø1.1/1.5mm | 1 |
| Retractor (small) | 1 | Drill Bit, Ø1.1mm | 2 |
| Retractor (large) | 1 | Tap | 1 |
| Periosteal Elevator (small) | 1 | Depth Gauge | 1 |
| Periosteal Elevator (large) | 1 | Torque Limiter, 0.3 N·m | 1 |
| Phillips Screwdriver Shaft | 2 | Special Instrument Tray(Ø1.5) | 1 |
| Reduction Forceps with Point | 1 | Drill Sleeve Φ1.1 | 2 |
| Reduction Forceps with Serrated Jaws | 1 | Stardrive screwdriver shaft (long) | 1 |
| Drill Bit, Ø1.8mm | 2 | Stardrive screwdriver shaft (short) | 1 |
| Straight Handle with Quick Coupling | 1 |
A medical device company founded in 1994, is now one of the largest designers, manufacturers, and suppliers of orthopedic implants and instruments. We have over 60,000 square meters of workshop. We are long term instrument contract manufacturer of top orthopedic companies. Our brand product lines include traumatology, spinal fixation system and surgical instrument, covering products such as femoral nail, titanium plates and screws, pedicle screw with rods, PEEK cage, balloon kyphoplasty for spine fracture and other instrument sets, already sell in Europe, Latin America, the Middle East and Asia.
QWould you please give some information on shipping mode and charges?
Normally we send through courier, or post upon request from clients.
QDo you have ISO 9001, CE?
Yes, we are an ISO 9001:2008 and EN ISO 13485:2012 Certified Company. We have CE mark for many of our products.
QWhat is the minimum order that we can place?
We expect your minimum orders to be least at US$1000. However, we understand that customers need to place smaller samples orders in the beginning in order to test market our products. Samples against cost are available on request.
QCan I buy products not shown but similar to your catalogue?
Of course you can, just send us pictures or samples. But this takes a little longer time for delivery.
QDo you have stock for listed products, or they are newly produced?
Generally, we have stock for every listed products, which were produced monthly. But it depends on our sales condition. Better to ask our salesman for accurate inventory information.
